Skip to content

Urinal Water Saver

Water Management System

Designed to minimise wastage.

Save Water & Money

This urinal water saver is designed to minimise wastage and ensure both water and money is saved. Infrared sensors are triggered when a person steps up to the urinal and is set to flush 20 minutes after the urinal is triggered. If someone new approaches the urinal before the 20 minutes is up, this will trigger the sensor again, negating the first activation and causing the urinal to instead flush 20 minutes after that persons use, instead of the first individual. By being set to work in this way, this urinal water saver feature is ideal for environments where there is heavy usage of the urinals in a short period of time, for example within schools where there is lots of use within break periods and minimal use at other periods throughout the day.

For times when your businesses facilities arenā€™t in use, for example during evenings or weekends, this urinal water saver can be set to provide a 12 hour curtesy flush. This keeps the washroom fresh, while saving you water and energy. This urinal water saver is serviced yearly.


Passive Infrared Sensor

  • Dimensions: 150x85x55mm
  • Made from white ABS plastic
  • Heavy duty
  • Flame Retardant
  • Range: 3m with 33o field of view

Lithium Cell

  • Capacity: 3.6 amp-hour
  • Voltage: 10 volts DC
  • Nominal open circuit

Solenoid Valve

  • 9V latching valve ā€“ UK WFBS approved
  • One valve per sensor
  • Pressure range: 0.1-10.0 BAR
  • In-built steel mesh strainer
  • In-built slow fill flow regulator

Fast Fill Flow Regulator

  • For large cisterns or more frequent flushing